Bring tired, hazy pavers back to life
Paver Restoration and Resealing in St Marys, GA
Ask for a free paver restoration estimate at your St Marys home by calling (912) 741-3281.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who handles paver restoration in St Marys, GA, and how quickly do they reply?
A local contractor takes paver restoration jobs across St Marys, GA, and a reply typically lands within a few hours, with the next business day as the outer limit. The visit and the written price are free. To ask for yours, call (912) 741-3281.
Restoration is for pavers that were sealed once and have since turned cloudy, faded or gappy. The old coat comes off, the surface is cleaned, new sand goes in and a fresh coat goes on. Imagine a driveway that stopped looking milky and patchy and went back to an even, deep color. If that is what you want for yours, ask for a free estimate online.
Which signs say my St Marys pavers need restoring and not only a wash?
A wash fixes dirt. It does not fix a coat that has failed. Peter's Pressure Washing, a Tampa company, lists four signs that point to restoration, shown below. If you see more than one on your pavers, call (912) 741-3281.
White, cloudy or hazy film
Peter's Pressure Washing lists a milky or hazy sealer as the first sign that the old coat has failed.
Faded, dirty color
When a wash brings back only part of the color, the coat is probably worn down, and a new one may be due.
Joints missing sand
Summer storms pull sand out of the gaps, says Safe Touch, and empty joints invite weeds.
Sunken or shifted stones
These need a base repair first. Sealing does not lift a stone or close a gap.
Does the old sealer have to come off before pavers are resealed?
When the old coat has failed, yes. Peter's Pressure Washing says it is necessary to strip failed sealer completely before the new one goes on, and Safe Touch says the same about stripping first instead of coating over. Layering new sealer on a hazy film only holds the haze in place. Where the old coat is still sound, Unilock says to test the old and new sealers for compatibility first. Ask which case yours is when you ask for a free estimate online.
Where around St Marys is paver restoration available?
Restoration estimates are open to homes in the city and to the towns below. Choose the closest one to read about that area. If your street is not shown, call (912) 741-3281.
Why does sealer fail on pavers in damp weather?
Peter's Pressure Washing names four causes: water vapor trapped under the coat, sealer laid on too thick, poor surface prep and an incompatible product used over the old one. Unilock adds that sealant may peel when the pavers were not fully dry. Moisture sits behind most of that list. Wikipedia lists St. Marys at about 48.93 inches of rain a year, and the town stands only 9.8 feet above sea level, so a coat put down too soon after a storm has less chance of surviving. A contractor who waits for dry pavers is protecting the work. To ask how yours decides, call (912) 741-3281.
What happens on the day pavers are restored?
The order of work matters more than any single product. Peter's Pressure Washing describes strip, clean, sand and seal, in that order, and the six steps below follow it. Drying time sits between the cleaning and the sanding. To pick a day, ask for a free estimate online.
1. Strip the failed coat
Peter's Pressure Washing says a stripper breaks the bond between the old sealer and the paver.
2. Clean with recovery
The loosened sealer is cleaned off with a surface cleaner tied to a vacuum recovery system, so the residue does not wash into the yard.
3. Let the surface dry
Unilock wants at least 24 hours of drying after cleaning, and cool shade can take longer.
4. Refill the joints
Coarse, angular silica sand goes into every gap. Peter's Pressure Washing favors wet sanding because it packs the sand tighter than dry sanding.
5. Flood coat
A first coat soaks into the sand and locks it in place.
6. Finish coat
A second coat goes on for color and protection, and the contractor says when feet and tires can return.
Why do joints keep losing sand after summer storms?
Safe Touch says summer storms pull sand out of paver joints, and sealing over empty joints is how weeds come back. In St. Marys, September is the wettest month at 6.91 inches, per Wikipedia, so heavy rain is part of every summer. A restoration refills the joints before the new coat locks them. Peter's Pressure Washing uses coarse, angular silica sand and prefers wet sanding for a tighter pack. If sand lines your driveway after storms, call (912) 741-3281.
Is restoration a one-day job or a two-day job?
It depends on what the pavers need. Peter's Pressure Washing describes its strip, sand and seal system as an all-in-one-day process. Safe Touch calls empty joints or a failed coat a two-day restoration, priced after someone looks at the site. A big driveway plus a pool deck, shade that slows drying or a rainy week all stretch the schedule. Ask for the plan in writing when you ask for a free estimate online.
What does paver restoration cost in St Marys?
No St. Marys company publishes a restoration rate. Safe Touch, a Northeast Florida company, lists $1.75 to $3.25 per square foot to clean, sand and seal and says strip-and-reseal sits higher when the old coat has failed. It does not give a stripping figure, so the table shows the clean, sand and seal base only. Treat it as the floor of a restoration price, not the whole of it. To get a written number for your pavers, ask for a free estimate online.
| Paved area | Typical example | Clean, sand and seal at the published range | Stripping failed sealer |
|---|---|---|---|
| 400 sq ft | Front walk and entry court | $700 to $1,300 | Added on top, no rate published |
| 600 sq ft | Two car driveway | $1,050 to $1,950 | Added on top, no rate published |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 | Added on top, no rate published |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 | Added on top, no rate published |
Math uses the $1.75 to $3.25 per square foot Safe Touch lists for Northeast Florida. Safe Touch says strip-and-reseal costs more than a standard seal and prices restoration after a site look. Repairs to sunken stones are separate.
Can I see restored pavers from around St Marys?
When is restoration not enough?
Sealer cannot raise a sunken stone or close a gap. Peter's Pressure Washing lists shifted and sunken pavers among the signs of a failing paver area, so those need their base reset before any coat goes on. A paver that is cracked through may be better replaced. If a stain will not lift, 757 Brick says replacing that one paver may be the answer. Point out loose or low spots when you call (912) 741-3281.
How long will restored pavers last before the next coat?
Unilock says to reseal every three to five years, while Safe Touch says two to three is typical in Northeast Florida and that full sun, pool chlorine and summer storms can pull it closer to two. St. Marys has a record high of 104 degrees in June, so open driveways take plenty of sun. Shaded walks hold a coat longer. Ask the contractor for a reseal window tied to your layout when you ask for a free estimate online.
Frequently Asked Questions
What is paver restoration?
It is the work of bringing worn pavers back to a good state: stripping any failed sealer, cleaning, refilling the joints with fresh sand and sealing again. Peter's Pressure Washing in Tampa lists those steps in that order. Safe Touch, a Northeast Florida company, prices restoration per square foot after looking at the site.
Does old paver sealer have to be stripped before resealing?
When it has failed, yes. Peter's Pressure Washing says the failed coat has to come off completely before a new one goes on, and Safe Touch says the same. Unilock adds that old and new sealers should be tested for compatibility before resealing.
How do I know my pavers need restoring?
Look for sealer that has turned white, cloudy or hazy, pavers that are faded and dirty, joints that have lost sand and stones that have sunk or shifted. Peter's Pressure Washing lists all of those as signs.
How long does paver restoration take?
Peter's Pressure Washing describes a strip, sand and seal system as an all-in-one-day process. Safe Touch says empty joints or a failed coat turn it into a two-day job. Plan on one to two days, and add a rainy-day cushion.
How much does paver restoration cost in St Marys?
No St. Marys company publishes a rate. Safe Touch lists $1.75 to $3.25 per square foot to clean, sand and seal in Northeast Florida and says strip-and-reseal sits higher when the old coat has failed. A 600 square foot driveway starts near $1,050 to $1,950 on that scale before stripping.
Why did my sealer turn white or cloudy?
Peter's Pressure Washing lists trapped water vapor, a coat laid on too thick, poor surface prep and an incompatible product. Unilock also warns that sealant over pavers that were not fully dry may peel. In a damp place like St Marys, moisture is the usual suspect.
Can pavers be resealed without stripping?
Sometimes. If the old sealer is still sound and compatible with the new one, a contractor may clean, re-sand and reseal without a stripper. Unilock says to test the two for compatibility first. A failing coat is a different case.
Why do my paver joints keep losing sand?
Safe Touch says summer storms pull sand out of joints, and sealing over empty joints lets weeds return. St. Marys gets 48.93 inches of rain a year, with September the wettest month at 6.91 inches, so refilling the joints is a normal part of the work.
How long should I stay off pavers after they are resealed?
Unilock asks for 24 hours of dry surface after sealing and up to 48 hours of dry weather for the sealer to cure. Keep the sprinklers off for that window, and ask the contractor for the exact time for the product used.
How often will restored pavers need sealing again?
Unilock says every three to five years. Safe Touch says two to three is typical in Northeast Florida and that full sun, pool chlorine and summer storms can pull it nearer to two.
Can sunken or shifted pavers be restored too?
They need their base reset before any sealer helps. Peter's Pressure Washing lists shifted and sunken pavers among the signs of a paver area that needs work. Point the low spots out when you ask for the estimate.
Is fall a good time for paver restoration in St Marys?
Safe Touch names fall as the time to seal. In St. Marys, November is the driest month at 2.08 inches and September the wettest at 6.91, so late fall gives a drier run. Unilock asks for 50 to 90 degrees.
Which other paver services can be added to a restoration?
Stain removal, a new coat on a patio or a brick walk can often be priced in the same visit. Pick the services below, or call (912) 741-3281 to describe the job.
Want restoration priced for your St Marys pavers?
Use the short form or the number below, and a contractor writes back within a business day, often much sooner.
Free, no obligation